The motor of a pontoon boat is usually between 24 and 60volts. The range in power can be from less than 1hp to over 5hp, and the thrust can be up to 50 lbs.
How much thrust do I need for a pontoon boat?
Depending on the boat’s weight, owners of multi-use pontoons and runabouts usually choose between 40 to 70 lbs of thrust.
What size trolling motor is needed for a pontoon?
The trolling motor shaft is the most important part of a pontoon boat.
What size trolling motor do you need for a 20 foot pontoon boat?
The answer is quite simply nothing that has less than 70 pounds of thrust, and if you are able to afford it, go for 80 pounds of thrust.
Do you need a special trolling motor for a pontoon?
You can mount a trolly motor on your pontoon boat to make it even more effective at fishing, but you’re going to want to choose a motor that’s more powerful. It’s important to keep this in mind when you’re planning on doing this.
Is 55lb thrust enough for pontoon?
A motor for a pontoon boat should be able to reach the water with 55 pounds of thrust. A sufficient battery bank is needed to provide enough range and power to run auxiliaries.
Is a 55lb trolling motor enough?
You’re definitely looking at investing in a 55lb thrust motor on a large vessel. If you’re going to be out on saltwater or moving against a current, it’s a good idea to go up from there.
How fast will a 86 lb thrust trolling motor go?
Depending on your boat shape, weight, water, wind, and other factors, the motor’s top speed can be as high as 4.5 mph.
What is the average weight of a 20 foot pontoon boat?
pontoon boats hold around 2,000 pounds of people and gear and weigh around 2,200 pounds. A pontoon boat trailer can weigh as much as 1,250 pounds.
What weight of anchor for a 25 foot pontoon?
Environmental factors such as wind speed are used to formulate holding power. The holding power of 90 pounds is enough to anchor a 20′ boat in winds up to 20 mph. A 25′ boat has a holding power of 125 pounds.
Where is the best place to put a trolling motor on a pontoon boat?
It makes sense to put the motor in front of the gate since it is close to the center line of the bow. Many pontoons have half-gates that can be used to accommodate trolly motor.
What is the best trolling motor shaft length for pontoon boat?
It’s better to go a little longer than you need, because most pontoon boats can get away with a 48″ shaft. The majority of pontoon boats have 55″ and 60″ trolly motor shafts.
What is the best battery for a trolling motor for a pontoon boat?
A 120-amp deep cycle marine battery with a 120-amp hour rating is recommended by us. Group 27 size or larger is what it is. Your motor will get more run time if the rating is higher.
How many pounds of thrust do I need for a 12 foot boat?
The bigger the boat, the more thrust it needs to move through the water. The thrust of the motor is what it is rated by. A 55lb thrust motor works well for a boat that is between 12 and 16 feet in length. The right size will allow you to use your motor to its fullest potential.
Is 55lb thrust enough?
You’re definitely looking at investing in a 55lb thrust motor on a large vessel. If you’re going to be out on saltwater or moving against a current, it’s a good idea to go up from there.
How long will a 55 lb thrust trolling motor run?
Newport Vessels has a 55lb thrust motor that draws a current of 52A. If you use a 100Ah battery, you will be able to run that motor at full speed for almost 2 hours. A 50Ah battery can keep the same motor running for over an hour.
How many pounds of thrust is 1 hp?
The measurement of 1hp is equivalent to over 500 feet of work per second and is considered to be 746 watt.