How To Wire Marinco Trolling Motor Plug?

How do you wire a Marinco trolling motor receptacle?

The wires need to be fed into the plug housing. The positive 24V wire should be connected to the terminal marked 24 while the negative wire should be connected to the terminal marked 12. The two wires should be connected as appropriate on the 24V motor.

How do you use a Marinco trolling motor plug?

Attach the receptacle to the boat, mount the black plug on the trolly motor and red plug on the leads of the battery charging station. The black and red plugs can be connected to troll or charge.

Why does my trolling motor plug have 3 wires?

One battery has a red and black wire for 12VDC and another battery has a red and black wire for 24VDC.

Why does my trolling motor have 4 wires?

Attach one set of wires to the positive pole of the battery and the other set to the negative pole of the battery. You can choose which battery setup to use with the switches on the trolling motor.

See also  Best Electric Trolling Motor For Jon Boat


 

How do you hook up a 12 volt trolling motor?

The positive leads of a 12v trolly motor system will attach to the positive battery terminal, while the negative leads will not. Attach multiple batteries in a row if you have a 24v or 36v motor.

How do you test a trolling motor plug?

The two ends of the wires that go to the front of the boat need to be measured. You should have enough power to light up a room. Measure again after you get to the trolly motor connection. Put both probes in the same hole.

Where do you put the circuit breaker on a trolling motor?

The positive battery lead wire is connected to the battery through the circuitbreaker.

How do you wire a trolling motor?

There is a positive and a negative terminal for battery 1. The jumper wire needs to be larger than the lead wire. There is a positive and a negative terminal for battery 2.

What is the orange wire for on my trolling motor?

There is a wire for the connection. The black wire is connected to the battery’s second terminal. The terminal of battery #2 has a red wire attached to it.

Can you use a car battery on a trolling motor?

Is my car battery compatible with my motor? Car batteries are not a good idea.

How many amps does a trolling motor draw?

The chart below shows how a 24v setting will draw more power than a 36v setting.

Do you need a circuit breaker for a trolling motor?

It is highly recommended to use a circuit breaker when installing a motor.

See also  Best Trolling Motor For Raft

Where do you put the circuit breaker on a trolling motor?

The positive battery lead wire is connected to the battery through the circuitbreaker.

How do you wire a trolling motor?

There is a positive and a negative terminal for battery 1. The jumper wire needs to be larger than the lead wire. There is a positive and a negative terminal for battery 2.