How To Mount Livescope Transducer To Trolling Motor?


 

What angle should my transducer be at?

The plane of the hull bottom is what the transducer should be mounted in. Sometimes a transducer mounted parallel with the hull bottom can work, but even the smallest nose-down angle can cause problems.

Which way does a Garmin transducer go on a trolling motor?

The transducer should be mounted on top of the water line. The center of the boat is where the transducer needs to be mounted. The transducer should be mounted on the starboard side if the boat moves in a clockwise direction.

How far away from motor should transducer be?

The location of the boat should be at least 15 in. There is a distance from the propeller to 38 cm.

Which way does the transducer face on a trolling motor?

The cable ties allow the transducer to slip out of the way. Depending on the angle of the transducer, it can be either a small or a large one, but all of them are meant for the motor. If you want to get the most accurate readings, the transducer should point straight down.

See also  Best Trolling Motor For Large Boat

Where should I mount my Garmin transducer?

The transducer should be mounted in front of the engine or engines. The transducer should be mounted far away from the engine propeller and shaft. The transducer shouldn’t be mounted in the path of the propeller on a single-drive boat.

How far out does LiveScope go?

This transducer can be adjusted easily. It could be down to 200′. The distance is up to 200′. That is a great view of real-time data.

How much power does LiveScope pull?

30Ah for 8+ hours is the size of the screen and livescope. 32Ah for a long period of time. 48 hours for a long period of time. If you are using Livescope, it is advisable to choose the correct battery for your graph.

Where should I mount my Garmin transducer?

The transducer should be mounted in front of the engine or engines. The transducer should be mounted far away from the engine propeller and shaft. The transducer shouldn’t be mounted in the path of the propeller on a single-drive boat.

Where is the best place to put your transducer?

The down stroke of most single outboard boat propellers should be mounted to the starboard side. The side that produces the least turbulence is the one that is most efficient.

Where should a transducer sit on a boat?

The location should be close to the center of the boat, but not on the side of the downward swing. This is on the starboard side of most boats.