How Long Should My Trolling Motor Shaft Be?

The minimum shaft length is recommended if you measure from the mounting surface of the transom or bow where the motor will be mounted. If you’re going to be fishing in rough water, you should add an extra 5 to the measurement.

How far should a trolling motor shaft be from the boat?

Measure the distance from the mount to the water line. Minn Kota suggests adding at least 20 to the bow/water line measurement, but we prefer to add at least 22.

How long is the average trolling motor shaft?

There is a standard shaft length. Measure the distance from where the shaft is mounted on the deck to the water to determine the correct length. Pick the next closest measurement by adding either 16 or 20 to MotorGuide or Minn Kota.

What happens if your trolling motor shaft is too long?

A long shaft is not good for a trolly. If the motor shaft is too long, you can’t put the motor in the correct position. The environment beneath the water as well as the propeller can be damaged by long shafts.

What is the best trolling motor shaft length for kayak?

Kayaks usually use 24 or 30 inch shafts because they are close to the water. We recommend that you measure your kayak to make sure you get the right shaft length.

How fast will a 86 lb thrust trolling motor go?

Depending on your boat shape, weight, water, wind, and other factors, the motor’s top speed can be as high as 4.5mph.

See also  Best Trolling Motor For Bow

How long should motor shaft be?

The length of the standard shaft is 15 to 20 and 25 to 50. The industry standard is the shaft lengths. The shaft length for a mid-range engine is 20.

What size trolling motor do I need for a 20 foot boat?

The answer is quite simply nothing that has less than 70 pounds of thrust, and if you are able to afford it, go for 80 pounds of thrust. Don’t be cheap on a trolly motor, that’s what my advice is.

Do trolling motors scare fish?

The difference between a two-stroke outboard engine and a trolly motor is that a two-stroke outboard engine scares fish, while a trolly motor doesn’t. A trolling motor is designed to help you move. The crappie will be scared by a troll motor in shallow water.

How do I make my trolling motor last all day?

The lifespan of your trolly motor battery is more affected by maintaining a proper charge. If you want to get the best performance out of your battery, you need to service it regularly, store it in a dry place, and use a trickle charger throughout the winter.

Can a trolling motor get you back to shore?

If you make it back to shore with no mistakes after a tiring day of fishing, it will be safer than if you didn’t. After a long day on the water, these saltwater trollers can push you and your prized catch back to shore.

Why does shaft length matter on a trolling motor?

It’s important to choose the right shaft length for the trolly motor so that it doesn’t cause a noise. The top of the motor’s foot should be covered by at least 12 inches of water.

See also  Best Trolling Motor With Garmin

How fast will a 36 lb thrust trolling motor go?

Smaller motors can reach speeds of 3 mph, but larger ones can reach speeds of up to 5 mph. If a larger motor is purchased, it isn’t a huge change.

Where is the best place to mount a trolling motor on a boat?

If there is a main motor, the trolly motor should be placed close to the center of the stern to not interfere with it. The stern’s top should be flush with the mount’s top.

How long should a transom trolling motor shaft be?

The minimum shaft length is recommended if you measure from the mounting surface of the transom or bow where the motor will be mounted. If you’re going to be fishing in rough water, you should add an extra 5 to the measurement.

Where do you mount a trolling motor front of a boat?

The port or starboard side of the bow is where you want the motor to be mounted. There is no wrong answer as it depends on how you operate the boat and how you fish. You should consider mounting the motor on the starboard side if you steer the boat from the port side.