Can You Put A Trolling Motor On A Pontoon Boat?

You can mount a trolling motor on your pontoon boat to make it even more effective at fishing, but you’re going to want to choose a motor that has at least 80 lbs thrust. It’s important to keep this in mind when you’re planning on doing this.

Where do you mount a trolling motor on a pontoon boat?

It makes sense to put the motor in front of the gate since it is close to the center line of the bow. Many pontoons have “half-gates” that can be used to hold the trolly motor.

What size trolling motor do you need for a pontoon?

Most pontoon boats have a 60″ (152.4 centimeter) trolly motor shaft.

What kind of trolling motor do you need for a pontoon boat?

It’s ideal for a pontoon boat to have 80 pounds of thrust. If you can overcome the wind and current, you have enough power to do so. The 55lb thrust motor might struggle in windy conditions.

See also  Best Trolling Motor For Bayliner Element

Can you put a trolling motor on the back of a pontoon boat?

The addition of a trolly motor to your boat can be very useful. Useful for adjusting parking or fishing gear. Depending on your application and available space, you can decide whether or not to mount it on your bow.

Can you put a trolling motor on the back of a pontoon?

You can put a motor on a pontoon boat. If you choose the right shaft length and thrust, you should be fine.


Can you put any outboard motor on a pontoon?

Only the Evinrude pontoon series outboards can be used on pontoon boats. The Evinrude E-TEC has all the benefits of the popular Evinrude, but they provide even greater thrust and a quieter ride.

Can a 115 hp pontoon pull a tube?

The tube ride will be slower if the pontoon is 16 feet long and has a 115hp motor. If you want to pull a tube behind a pontoon, you have to have enough power to pull it.

How big of a motor do you need for a 20 foot pontoon?

What is the size of the motor for a boat? You can get by with a 60 HP motor if you want to go up to 24 mph. If you want speeds between 24 to 29 MPH, then you should use a 90 HP motor.

Is 90 hp enough for a pontoon boat?

It is possible for a pontoon boat with a 90hp motor to do that. Even if your boat is full of people, you should be hitting the optimal speed. Most pontoon boat captains want to hit the golden 22 mph mark.

See also  Best Trolling Motor For Pontoons

What size trolling motor do I need for a 20 foot boat?

You can begin to think about a 36-volt system for your boat if it’s in the range of 18 to 20 feet. There is enough power in a 24v trolly motor to deal with any situation. The best motor for this size of bass boat is a 60′′ shaft that has 80 lbs of thrust.

What size trolling motor do I need for my 24 foot pontoon?

A motor with 80 pounds of thrust is what I recommend. There is enough for a 24 foot boat. That is the best motor size for a pontoon boat, and I recommend the Minn Kota Terrova.

How far below the bottom of the boat should a trolling motor be?

The top of the motor should be submerged at least 12 inches under the water in order to ensure adequate power and to prevent noisy cavitation which will scare fish.

What side of a boat do you mount a trolling motor?

The port or starboard side of the bow is where you want the motor to be mounted. It depends on how you operate the boat and how you catch fish. You should consider mounting the motor on the starboard side if you steer the boat from the port side.

Can a trolling motor be mounted off center?

The center of the bow or transom doesn’t have to be perfect for most trolly motor designs. The mounting pad needs to be flat on the bow or transom.