Too long a motor shaft is not good. If the motor shaft is too long, you can’t put the motor in the correct position. The environment beneath the water as well as the propeller can be damaged by long shafts.
Does shaft length matter on trolling motor?
It’s important to choose the right shaft length for the trolly motor so that it doesn’t cause a noise. The top of the motor’s foot should be covered by at least 12 inches of water.
Is a longer shaft better on a trolling motor?
The longer shaft is great for making sure your motor stays in the water and maintains stability while you steer in rough conditions.
Can a trolling motor shaft be shortened?
If your trolly motor is too long, you can shorten its shaft. It’s a good idea to shorten the shaft at an authorized service center. You can void your warranty if you shorten the shaft yourself.
How do you pick a Minn Kota shaft length?
Take a look at the mounting surface of the transom or bow. Fishing in rough water requires a waterline measurement of at least five feet. The measurement for steering a hand control motor while standing should be added to the waterline measurement. The appropriate shaft length can be found by using the measurement and the tables.
How far below the bottom of the boat should a trolling motor be?
The top of the motor needs to be submerged at least 12 inches under the water in order to ensure adequate power and to prevent noise which will scare fish.
How much does shaft length affect distance?
There is no measurable difference in distance due to the standard 1/2′′ incremental shaft length increases. The effect of standard length increases on clubs is to make them harder to hit.
What happens if shaft is too long?
A long driver shaft can make it hard for the player to find the middle consistently. Ball speed and distance can be reduced by off-center hits.
How long will a 55 lb thrust trolling motor run?
The battery’s Amp-Hour rating is a factor in the runtime. The 55lb thrust motor has a 50ah battery that can run for an hour.
Can a trolling motor be too deep?
Setting your trolly motor at an appropriate depth will help it function properly and reduce the risk of it being damaged. The motor should be submerged 12 inches below the waterline.
Why are trolling motor shafts so long?
You need to factor in wave action if you want to establish the mount-to-waterline distance. A longer shaft is needed to keep the propeller submerged in the water.
What size trolling motor do I need for a 21 foot boat?
You can begin to think about a 36-volt system for your boat if it’s in the range of 18 to 20 feet. There is enough power in a 24v trolly motor to deal with any situation. The best motor for this size of bass boat is a 60′′ shaft that has 80 lbs of thrust.
What is a good length for a trolling rod?
What do you want to see in a trolly rod? A good bet is to get a rod that is between 7′ and 9′ because it is the most versatile length for a troll rod.
Will a 45 inch shaft trolling motor work on a pontoon boat?
The good news is that it is possible to put a motor on a pontoon boat. If you choose the right shaft length and thrust, you should be fine.
Does shaft length make a difference?
Longer shafts can help you hit it farther but it doesn’t always equate to more distance for the average player. There’s a catch if you want to become a long drive champion, and that is accuracy.