Best Trolling Motor For Key West 1720

Newport Vessels Kayak Series 55lb Thrust Transom Mounted Saltwater Electric Trolling Motor w/LED Battery Indicator (24″ Shaft)

Check Price on Amazon

MotorGuide 8M4000954 Trolling Motor Power Receptacle, 2-Prong 12V, 24V or 36V Trolling Motors, for Bow-Panel Installation

Check Price on Amazon

T-H Marine GFH-1R-DP G-Force Handle Patented Trolling Motor Replacement Lift and Release Cord, Red

Check Price on Amazon

Newport Vessels NV-Series 36lb Thrust Saltwater Transom Mounted Trolling Electric Trolling Motor w/LED Battery Indicator & 30″ Shaft

Check Price on Amazon

Minn Kota Endura C2 30 Freshwater Transom Mounted Trolling Motor (30″ Shaft)

Check Price on Amazon

Watersnake T18 ASP – 18 Pound Thrust 12v Electric Saltwater Trolling Motor with Transom Mount

Check Price on Amazon

Watersnake Tracer Transom Mount Trolling Freshwater Motor

Check Price on Amazon

Eliminator Trolling Motor Prop Nut Aluminum For MinnKota 35-70 lb Models (GFEL-MKS-BK-DP)

Check Price on Amazon

What size boat trolling motor do I need?

The thrust needs to be at least 2 lbs. for every 100 lbs. of fully loaded boat weight. If the wind or current is a big factor in where you fish, you’ll want to increase your thrust.

How big of a trolling motor do I need for a 16 ft flat bottom Jon boat?

If you want to get the boat on the plane, you need more than enough power to push the boat upstream, which is why you should use 8hp and 20hp motors. A 20 to 25hp outboard motor can be used on the Jon boats.

How fast is a 12 volt trolling motor?

It is possible to have a maximum speed of 5 mph, but it is not ideal for fishing. The primary means of propulsion for a lot of people is the trolly motor. Jon Boats, dinghys, and other small personal watercraft are very popular with this.

How fast will a 55 lb thrust trolling motor go?

You will need the larger-sized motor when you have a larger boat, even though the 30lb, 40lb, and 55lb thrust trolling motors all top out at 5 miles per hour. If you don’t, your boat won’t be able to hit anything.

What size trolling motor do I need for a 18 ft boat?

You can start thinking about a 36-volt system for your boat if it’s in the range of 18 to 20 feet. There is enough power in a 24v trolly motor to deal with any situation. The best motor for this size of bass boat is a 60′′ shaft that has 80 lbs of thrust.

What size battery do I need for a 55 lb thrust trolling motor?

If you were to use a 55lb thrust motor for two hours at full speed, you would need a battery with a 100 to 120Ah rating.

Can a trolling motor be too long?

Too long a motor shaft is not good. If the motor shaft is too long, you can’t put the motor in the correct position. The environment beneath the water can be damaged if the shaft is too long.

How long will a 24 volt battery last on a trolling motor?

The trolling motor should last at least 8 to 10 hours and may last up to several days before you need to refill your batteries. It’s a good idea to get it checked out by a professional if it isn’t lasting long.

Which is better 12v or 24V trolling motor?

The thrust, power consumption, and efficiency of the 12V and 24V troll motor are the main differences. 12V motors have a maximum of 60 lbs of thrust with lower operating time on a charge, while 24V motors are more powerful, more efficient, but are more expensive and require two batteries to run.

Will a 24V trolling motor run longer than a 12v?

When running on a battery with the same hours, the run time of 24v trolly motor is twice as long as that of 12v trolly motor. This is due to the fact that they have a significantly lower draw on the Amps and are mostly used at a lower setting.

What size motor do I need for a 16 foot fiberglass boat?

The rule for Jon boats is that boats between 8 feet and 16 feet in length should have at least 8 to 20hp of motor power. Any Jon boat that is over 18 feet long needs a motor in the 20 to 25hp range. Jon boat experts advise boaters to use a 18 to 20hp motor for their jon boat.

Can a trolling motor be too long?

Too long a motor shaft is not good. If the motor shaft is too long, you can’t put the motor in the correct position. The environment beneath the water can be damaged if the shaft is too long.

How far in the water should a trolling motor be?

The top of the motor should be submerged at least 12 inches under the water in order to ensure adequate power and to prevent noisy cavitation which will scare fish.

See also  How Much Thrust Trolling Motor?